RHINO SE4 Operator's Manual download pdf (Page 120)

MAINTENANCE

SE4 05/05 Maintenance Section 5-2

MAINTENANCE

Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a

minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and

trouble free operation.

Always disengage the PTO before raising the Rotary Cutter for transporting or making

adjustments.

Lubrication

Do not let excess grease collect on or around parts,

particularly when operating in sandy areas. The

illustrations show lubrication points. The chart

gives the frequency of lubrication in hours, based

on normal operating conditions. Severe or unusual

conditions may require more frequent lubrication.

Use an SAE multi-purpose, lithium-type grease for

all locations shown. Be sure to clean the fitting

thoroughly before using grease gun. Failure to

maintain proper lubrication will result in damage to

U-joints, gearbox, and/or driveshaft.

Lubrication Fitting Location

ITEM DESCRIPTION FREQUENCY

1 Driveline U-Joints 8 hours

Driveline Telescoping8 hours

2 Gearbox Check Daily

3 Wheel Hubs Weekly

4 Shield Bearings 16 hours

5 Tailwheel Beam 8 hours

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 137 138

No comments

RHINO SE4 Operator's Manual Page 120